Search Northern Tool

Looking for Answers about Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011?

Air Tools + Compressors(Q:1392 A:1929)
Automotive(Q:2431 A:3247)
Clothing + Work Wear(Q:137 A:158)
Construction(Q:691 A:899)
Electrical(Q:255 A:326)
Fans(Q:691 A:834)
Farm + Acreage(Q:754 A:893)
Food Processing(Q:299 A:419)
Generators(Q:1638 A:2301)
Hand Tools(Q:362 A:437)
Hydraulics(Q:1020 A:1128)
Lawn + Garden(Q:2529 A:3451)
Lighting(Q:194 A:238)
Logging(Q:406 A:615)
Material Handling(Q:974 A:1174)
Metal Fabrication(Q:656 A:772)
Power Tools(Q:812 A:1305)
Pressure Washers(Q:1073 A:1449)
Safety(Q:144 A:203)
Seats(Q:341 A:472)
Security Equipment(Q:270 A:400)
Snow + Ice Removal(Q:278 A:349)
Sporting Goods + Toys(Q:536 A:715)
Storage + Organizers(Q:692 A:946)
Tires + Wheels(Q:634 A:816)
Trailers + Towing(Q:1649 A:2042)
Water Pumps(Q:1158 A:1410)
Welding(Q:693 A:1115)
Winches(Q:396 A:505)

Customer Questions & Answers for
Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011

Item# 706028
This Kohler Command Pro horizontal engine features a 4-cycle, slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. This engine is an excellent choice for aerators, chipper/shredders, dethatchers, edgers, log splitters, pressure washers, pumps, stump grinder/cutters, tillers, compressors, generators and tamper/plate compactors. Air Cleaner Type Heavy duty cyclonic, Auto Compression Release Yes, Bearing Type Ball, Bolt Circle in. 3 5/8, Bore x Stroke in. 2.8 x 2.1, Carburetor Float, Compression Ratio 8.51, Cooling System Air cooled, Cylinder Bore Cast iron, Cylinders qty. 1, Dimensions L x W x H in. 12 11/16 x 15 3/16 x 14 3/16, Displacement cu. in. 12.7, Engine Displacement cc 208, Engine Type Command Pro small CH270-OHV, Fuel Filter 3 Fuel filters fill neck, in tank, carburetor inlet, Fuel Tank Yes, Fuel Tank Capacity qt. 4, Fuel Type Gasoline, Governor System Mechanical, Ignition System Electronic, Low Oil Alert Yes, Lubrication System Splash, Max. RPM 3,600, Muffler Included Yes, Oil Capacity qt. 0.63, Rated Power HP 7, Shaft Diameter in. 3/4, Shaft Length in. 2 7/16, Shaft Output Horizontal, Shaft Rotation From PTO Shaft Side Counterclockwise, Start Type Recoil, Torque ft./lbs. 9.15, Application Log splitter, pressure washer. User-Friendly Maintenance with interference-free PTO face, dual oil fills and drains No-tool-required-all season air cleaner Easy-access throttle, choke and shutoff Oil Sentry automatic low oil engine shutdown system Carburetor bowl drain High power performance from overhead valve design, increased displacements and a high-inertia flywheel Extended run times, thanks to a large metal fuel tank and chrome-plated cap and a swirl induction combustion chamber Quiet, smooth operation from an oversized muffler with heat shield, a mechanical governor, a sound-deadening alloy crankcase and a silenced air intake Easy dependable starts, thanks to the electronic ignition system, automatic compression release, dual ball bearings and an indexable easy pull recoil starter Reliable, long-life design with Quad-Clean heavy-duty cyclonic air cleaner, warm air intake system for cold weather operation, a cast iron cylinder bore, a steel-forged crankshaft and a Stellite-faced exhaust valve Water trap separates moisture in fuel 3 fuel filters fill neck, in tank and carburetor inlet
Customer Questions & Answers:
12 Questions
 | 
12 Answers
Overall Rating:
4.8 out of 5
4.8
out of
5
Product Details

Questions & Answers for Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011

Question

what are the mounting base dimensions for the Kohler Pro 7 engine?

asked 4 months, 2 weeks ago
by
wally2101
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The mounting base dimensions would be 6.38" x 3.15".
answered 4 months, 2 weeks ago
by
ProductExpert6
0points
0out of 0found this answer helpful.
Question

Approx. how many HP is this motor ?

asked 1 year ago
by
alchemist
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
-1point
0out of 1found this question helpful.
1 answer
Answers
answer 1
Staff Answer
Due to government regulations, we are unable to provide the HP on an engine. The cc rating shown is a more accurate measurement.
answered 1 year ago
by
ProductExpert12
-1point
0out of 1found this answer helpful.
Question

Does this motor have a tapped shaft? What size?

asked 1 year ago
by
Motorbuggy
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This is a straight shaft and the size is 3/4in. x 2 7/16in.
answered 1 year ago
by
ProductExpert7
0points
0out of 0found this answer helpful.
Question

How do you operate the throttle / governer?

I will be using this motor to run a fan on a small flats boat. how will I manually adjust the engine speed / throttle position? Is the throttle control on the engine, or do I need to buy a separate cable?
asked 1 year, 1 month ago
by
ABIE
 - Texas
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The throttle is on the engine. There is a lever that you can just move up and down to adjust the speed.
answered 1 year, 1 month ago
by
ProductExpert6
0points
0out of 0found this answer helpful.
Question

Does the crankshaft P.T.O. side have a threaded hole in it for pulley retention?

asked 1 year, 1 month ago
by
Anonymous
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This Kohler Command Pro Horizontal Engine has a keyway and a hole in the end of it, so it can be used for pulley retention.
answered 1 year, 1 month ago
by
ProductExpert37
0points
0out of 0found this answer helpful.
Question

do i need to run break in oil in this engine

asked 1 year, 2 months ago
by
DHfarms
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The engine does not need to be run with break in oil. Just use the normal engine oil and do normal engine maintenance. The oil should be changed at 5-10 hours use.
answered 1 year, 2 months ago
by
ProductExpert6
0points
0out of 0found this answer helpful.
Question

Specific applications?

The specs seem perfect for my Troy Bilt tiller, but only mentions pressure washers and log splitters. Is the oil capacity too low to operate at an angle when tilling?
asked 1 year, 8 months ago
by
Anonymous
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
-1point
0out of 1found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Kohler Command Pro hHorizontal engine can also be used in a tiller application.
answered 1 year, 8 months ago
by
ProductExpert43
+1point
1out of 1found this answer helpful.
Question

what is the space between bolts

on mounting shaft end?
asked 1 year, 9 months ago
by
Anonymous
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
When measured from the center of one bolt to the center of another diagonally , the bolt circle is 3-5/8".
answered 1 year, 8 months ago
by
ProductExpert29
0points
0out of 0found this answer helpful.
Question

what is the country of origin?

asked 2 years, 7 months ago
by
kenny11
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
+3points
4out of 5found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Kohler engine is manufactured in China.
answered 2 years, 7 months ago
by
ProductExpert12
-14points
1out of 16found this answer helpful.
Question

what is the height from the botom of the base of the center of the shaft?

asked 2 years, 8 months ago
by
Anonymous
on Kohler Command Pro Horizontal Engine - 208cc, 3/4in. x 2 7/16in. Shaft, Model# PA-CH270-3011
+4points
4out of 4found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The height from the bottom of the base to the center of the shaft for this Kohler engine is 4.173 inches.
answered 2 years, 8 months ago
by
ProductExpert31
0points
0out of 0found this answer helpful.
1 2 next>>