Search Northern Tool

Looking for Answers about "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"?

"Automotive(Q:561 A:847)
"Construction(Q:6 A:8)
"Fans(Q:235 A:319)
"Farm + Acreage(Q:39 A:54)
"Food Processing(Q:58 A:78)
"Hand Tools(Q:4 A:4)
"Lawn + Garden(Q:68 A:110)
"Material Handling(Q:346 A:409)
"Power Tools(Q:51 A:67)
"Trailers + Towing(Q:21 A:29)
"Welding(Q:69 A:85)
Air Tools + Compressors(Q:1486 A:2068)
Automotive(Q:1878 A:2434)
Clothing + Footwear(Q:144 A:184)
Construction(Q:694 A:930)
Asphalt Equipment(Q:36 A:42)
Caulk Guns(Q:2 A:2)
Cement Mixers(Q:31 A:63)
Curb Machinery(Q:9 A:11)
Demolition Tools(Q:20 A:24)
Hardware Kits(Q:12 A:14)
Jobsite Radios(Q:24 A:31)
Measuring Tools(Q:112 A:123)
Mortar Mixers(Q:7 A:9)
Outrigger Pads(Q:1 A:3)
Painting(Q:142 A:216)
Rebar Cutters(Q:10 A:10)
Road Magnets(Q:3 A:5)
Rock Drills(Q:3 A:3)
Scaffolding(Q:119 A:182)
Tape + Adhesives(Q:5 A:6)
Thermometers(Q:2 A:2)
Electrical(Q:261 A:357)
Engines(Q:365 A:439)
Fans(Q:576 A:695)
Farm + Acreage(Q:916 A:1091)
Food Processing(Q:250 A:377)
Generators(Q:1590 A:2282)
Hand Tools(Q:413 A:503)
Hydraulics(Q:1211 A:1333)
Lawn + Garden(Q:2642 A:3642)
Lighting(Q:232 A:331)
Logging(Q:469 A:754)
Material Handling(Q:750 A:947)
Metal Fabrication(Q:667 A:791)
Power Tools(Q:733 A:1245)
Pressure Washers(Q:1137 A:1555)
Safety(Q:141 A:210)
Seats(Q:373 A:551)
Security Equipment(Q:306 A:462)
Snow + Ice Removal(Q:308 A:416)
Sporting Goods + Toys(Q:538 A:731)
Storage + Organizers(Q:777 A:1076)
Tires + Wheels(Q:694 A:926)
Trailers + Towing(Q:1514 A:1968)
Water Pumps(Q:1287 A:1578)
Welding(Q:677 A:1076)
Winches(Q:451 A:580)
Most Recent Questions
Recent Question:
Can the nozzle opening really be 0.039mm ?
Recent Question:
Is this the same as an airless sprayer, if not will it still work?
Recent Question:
Can i use this to spray Polyurethane Enamel Paint?
Recent Question:
will this go on a wagner paint crew model 0515106?
Recent Question:
What is the minimum and maximum fan width?
Questions with Most Recent Answers
Question:
Can the nozzle opening really be 0.039mm ?
Question:
Is this the same as an airless sprayer, if not will it still work?
Question:
Can i use this to spray Polyurethane Enamel Paint?
Question:
will this go on a wagner paint crew model 0515106?
Question:
What is the minimum and maximum fan width?

Customer Questions & Answers for
"Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"

Item# 4519023
"For primer and heavy materials. Locking air regulator with gauge, brass fluid and air nozzle. Nozzles Included qty. 1, Paint Cup Size oz. 20 1/4, Air Inlet Size in. NPT 1/4, Required CFM 7-9, Nozzle Size mm 2.3, Paint Cup Material Plastic."
Customer Questions & Answers:
8 Questions
 | 
15 Answers
Overall Rating:
4.6 out of 5
4.6
out of
5
Product Details

Questions & Answers for "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"

Question

Can gun spray epoxies

Need to apply smoth thick topcoat of epoxie for restoring antique claw foot bathtub.
asked 3 years, 3 months ago
by
Jimbo35
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
The Vaper HVLP model #19023 has a 2.3mm tip which is capable of spraying epoxies.
answered 3 years, 3 months ago
by
ProductExpert27
+1point
1out of 1found this answer helpful.
answer 2
I sprayed Gelcoat thinned to 10% ... so West Systems Epoxy could be used the same way and thinned accordingly.
answered 11 months ago
by
CaptDanger
 - Michigan
+1point
1out of 1found this answer helpful.
Question

Can this spray gun be used with latex paint?

asked 4 years, 11 months ago
by
Anonymous
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
+2points
2out of 2found this question helpful.
2 answers
Answers
answer 1
Staff Answer
Yes this spray gun can be used with latex paint.
answered 4 years, 11 months ago
by
ProductExpert7
+4points
4out of 4found this answer helpful.
answer 2
Yes, but works better with 10% water added. I got a great smooth finish using a 5 hp, 60 gal compressor and 25 ft of 3/8" hose at 25psi on the gun.
answered 1 year, 3 months ago
by
GNick
 - Dallas, Tx
+1point
1out of 1found this answer helpful.
Question

Oil based paint?

Would this be a good gun to use oil based exterior paint to paint a wrought iromn fence outside? I need something that will minimize overspray or fogging.
asked 4 years, 10 months ago
by
Gotpaint
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
+1point
1out of 1found this question helpful.
2 answers
Answers
answer 1
Staff Answer
This gun would not be the best choice for oil based paint. This one is best for high build primers or epoxy. I would suggest the gun with the 1.4mm size for your oil based paint, item #4519000.
answered 4 years, 10 months ago
by
ProductExpert6
0points
0out of 0found this answer helpful.
answer 2
Yes, it will work. I sprayed Rustoleum rusty metal primer (oil based) on patio furniture using a Vaper 1.7mm gun. It worked but was too slow. The 2.3mm gun would be better. The bigger problem will be getting enough air through a long hose. I could not get a nail gun to work at the end of two 50 ft hoses, so a paint gun would be very iffy. A portable compressor with shorter hose might be better, but cfm could be an issue.
answered 1 year, 3 months ago
by
gnick540
 - Rockwall (Dallas), Tx
+1point
1out of 1found this answer helpful.
Question

Can you purchase different size nozzles for this gun

 
Products related to my question
 
asked 3 years, 4 months ago
by
Anonymous
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
This unit only has the 2.3mm nozzle which is the only size for this gun.
answered 3 years, 4 months ago
by
ProductExpert10
0points
0out of 0found this answer helpful.
answer 2
I was unable to find any nozzle and needle kits, so I spent the $40 to buy another gun. I do suggest buying the same brand so the wrenches and cups will work on both. You can be sure that a nozzle kit would cost $20 or more, so you may as well just get the whole gun.
answered 1 year, 3 months ago
by
gnick540
 - Rockwall (Dallas), Tx
+1point
1out of 1found this answer helpful.
Question

I plan to use this 2.3 gun for gel coat on a Corvette but can I use this gun for epoxy primer or will the 2.3 tip be too large?

 
Products related to my question
 
asked 2 years ago
by
canister
 - NY
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
Yes, it will work just fine as long as it’s not reduced. If you plan on reducing the primer then I would suggest item # 4519018. Please see below.
answered 2 years ago
by
ProductExpert19
0points
0out of 0found this answer helpful.
answer 2
I have both guns (1.7 and 2.3mm). The 1.7 is perfect for auto epoxy primer, so I suspect the 2.3 would throw too much material and you'd end up with runs.
answered 1 year, 3 months ago
by
gnick540
 - Rockwall (Dallas), Tx
+1point
1out of 1found this answer helpful.
Question

what compressor is needed to provide adequate air flow?

asked 2 years, 1 month ago
by
Anonymous
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
The compressor would need to produce the required 7-9 CFM for this spray gun.
answered 2 years, 1 month ago
by
ProductExpert31
-1point
0out of 1found this answer helpful.
answer 2
I used the 2.3 Vaper with a Sears 1 hp, twin compressor. I sprayed GelCoat - 5 coats. Sure, I had to wait sometimes for the compressor to "catch up," but it presented no problems. I think the airflow at 40psi was something like 6-7 cfm.
answered 1 year, 10 months ago
by
canister
 - NY
+2points
2out of 2found this answer helpful.
Question

Will this spray unthinned gel coat?

asked 3 years, 10 months ago
by
Anonymous
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
+3points
3out of 3found this question helpful.
2 answers
Answers
answer 1
Staff Answer
Yes, this will spray gel coat that has not been thinned.
answered 3 years, 10 months ago
by
ProductExpert9
+2points
2out of 2found this answer helpful.
answer 2
It will need to be reduced about 5-10 %. I use it often for this.
answered 2 years, 9 months ago
by
northriver
 - Georgia
+1point
1out of 1found this answer helpful.
Question

can this gun use the 3m pps system

asked 4 years, 3 months ago
by
underwater
on "Vaper HVLP Spray Gun Set with Plastic Cup - 2.3mm, Model# 19023"
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This spray gun can not be used with the 3M PPS System.
answered 4 years, 2 months ago
by
ProductExpert12
0points
0out of 0found this answer helpful.
1 of 1