Looking for Answers about FREE SHIPPING - SHOP FOX Gunsmithing Lathe - 12in. x 36in., Model# M1112?

The SHOP FOX® Gunsmithing Lathe is a superb gearhead lathe thats in the bulls eye with its high-tolerance bearings, D1-5 camlock spindle, outboard spindle bore supports, quick change gearbox, induction-hardened bed ways and extra-fine longitudinal feed rate of 0.0011in./r and cross feed rate of 0.0004in./r. Other features include a heavy-duty vibration dampening cast iron stand, ball bearing tipped follow rest and steady rest, and a tailstock that can be tightened with a torque wrench to maintain precision chuck-to-tailstock alignment every time the tailstock is locked down. Even if you are not a gunsmith, youll appreciate all the precision and features this lathe offers. Cannot ship to AK, CA, CT, HI, LA, MA, MD, MS and RI. Stand Included: Yes, HP: 2, Volts: 220, single phase, Speed (RPM): 1,725, Spindle Speeds (qty.): 9, Width Between Centers (in.): 36, Carriage Travel (in.): 29, Thread Cutting (in.): 4 TPI-112 TPI, Thread Cutting (mm): 0.2-4.5, Dimensions L x W x H (in.): 61 x 26 x 54 1/2 Removable gap bed allows turnings up to 17in. in diameter 9 spindle speeds ranging from 70 to 1400 RPM Easy-to-use lever controls Hardened and ground cast iron bed Cuts 4-112 Standard TPI and .2-4.5 Metric Full length splash guard On/off reverse switch on carriage Halogen worklight Ball bearing steady/follow rests Outboard end support screws Socket for tailstock lock Cast iron stand with extended base Cast aluminum gear cover D1-5 spindle nose (6 pin) 1 5/8in. spindle bore 6in. 3-jaw chuck with two sets of jaws 8in. 4-jaw chuck with reversible jaws 10in. face plate Toolbox Quick-change tool post with one tool holder 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center Set of six change gears 1/2in. chuck w/ MT#3 arbor Swing over bed: 12in. Swing over gap: 17in. Swing over cross slide: 7in. Distance between centers: 36in. Bed width: 7 1/4in. Spindle bore: 1 5/8in. Spindle nose taper: MT#5 Spindle nose: D1-5 Camlock Cross slide travel: 6 1/4in. Compound travel: 3 1/4in. Tailstock barrel taper: MT#3 Tailstock barrel travel: 4in. Range of speeds 70, 200, 220, 270, 360, 600, 800, 1000, 1400 RPM Height w/o stand: 23in.