Search Northern Tool

Looking for Answers about "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"?

"Automotive(Q:558 A:789)
"Construction(Q:8 A:12)
"Fans(Q:187 A:237)
"Farm + Acreage(Q:39 A:53)
"Food Processing(Q:62 A:84)
"Hand Tools(Q:6 A:8)
"Lawn + Garden(Q:56 A:83)
"Material Handling(Q:376 A:453)
"Power Tools(Q:42 A:53)
"Trailers + Towing(Q:29 A:39)
"Welding(Q:132 A:244)
Air Tools + Compressors(Q:1425 A:2001)
Automotive(Q:1991 A:2651)
Clothing + Footwear(Q:170 A:227)
Construction(Q:680 A:889)
Electrical(Q:250 A:336)
Engines(Q:384 A:470)
Fans(Q:493 A:556)
Farm + Acreage(Q:980 A:1161)
Food Processing(Q:254 A:382)
Generators(Q:1554 A:2248)
Hand Tools(Q:433 A:529)
Hydraulics(Q:1295 A:1433)
Lawn + Garden(Q:2713 A:3793)
Lighting(Q:240 A:354)
Logging(Q:547 A:906)
Material Handling(Q:805 A:1027)
Metal Fabrication(Q:584 A:713)
Power Tools(Q:763 A:1274)
Pressure Washers(Q:1110 A:1524)
Safety(Q:146 A:218)
Seats(Q:387 A:585)
Security Equipment(Q:241 A:380)
Snow + Ice Removal(Q:330 A:444)
Sporting Goods + Toys(Q:545 A:739)
Storage + Organizers(Q:804 A:1134)
Tires + Wheels(Q:710 A:954)
Trailers + Towing(Q:1498 A:1964)
Water Pumps(Q:1307 A:1606)
Welding(Q:599 A:898)
Winches(Q:473 A:610)

Customer Questions & Answers for
"Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"

Item# 27485
"Convert your costly inefficient masonry fireplace with this large, 77.2 efficient, 75,000 BTU wood insert. Stainless steel secondary combustion tubes and a C-cast baffle for a clean-burning EPA-certified insert. This unit produces almost twice the heat of a non-certified insert with the same amount of wood. 2.4 cu. ft. firebrick-lined firebox, recommended to heat 500-2100 sq. ft. holds 20in. logs and provides burn time of up to 7-9 hours. Built-in air-wash system keeps ceramic glass clean, enabling monitoring and enjoyment of the fire. Fits most mid-size masonry fireplaces with opening dimensions of 29in.W x 15in.D x 22 5/8in.H. 5/16in. thick steel top. Includes variable speed 120 CFM blower and 32in. x 50in. faceplate. Firescreen option AC01315 allows operation with door open. Heat Shield for mantel AC01317 is available. Minor assembly required. UL Yes, Blower CFM 130, Max. Log Size Accepted L in. 20, Flue Collar Size in. 6, Mobile Home Approved No, BTU Output 75,000, Dimensions W x D x H in. 27 x 26 1/2 x 22, Firebox Size W x D in. 21 1/4 x 16 3/4, EPA Certified Yes, Fuel Type Wood, EPA Exempt No, Blower Included Yes, Heat Settings Variable, Door Opening W x H in. 17 3/4 x 9, Assembly Required Yes, Blower Power Supply Volts, Amps 110V, Stove Pipe Included No, Heating Capability sq. ft. 500-2,100, Product Type Fireplace insert, Full Load Run Time Hours 7-9. 77 efficient insert is recommended to heat 500 to 2100 sq. feet Provides a 7-9 hour full load run time Accepts logs up to 20in. Variable-speed 120 CFM blower Air-wash system keeps glass clean Fits most mid-size fireplaces with minimum opening dimensions 28 3/4in.W x 14 1/2in.D x 22 5/8in.H Includes 32in. x 50in. faceplate Assembly required"
Customer Questions & Answers:
29 Questions
 | 
35 Answers
Overall Rating:
4.6 out of 5
4.6
out of
5
(10 Reviews)10
Product Details

Questions & Answers for "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"

Question

Is there an option to have this insert ducted through the existing ductwork in the house?

 
Products related to my question
"Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
4.6 out of 5(10)
 
 
 
 
 
asked 3 months, 1 week ago
by
GESTES
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
There is no option for connection to existing house ducting on this insert.
answered 3 months, 1 week ago
by
ProductExpert5
0points
Question

Does the faceplate get sealed against my masonary?

If it is not sealed, what prevents room air from escaping up the chimney - or is the area between the existing chimney and the new stove pipe sealed somehow?

And - can this be used in an existing Heatilator fireplace?
asked 4 months ago
by
maurerro
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
The faceplate is for cosmetic purposes only. It does not need to be sealed or anything. However, you do want to install a block off plate to reduce the possibility of a cold air draft from the masonry chimney to get into the room when the insert is not working, the installation of a sheet metal block off plate is recommended. Once you have made the block off plate to the dimension, cut the pipe slightly larger than the liners diameter and then install the liner through this hole. Set the plate in place and secure with masonry nails into mortar joints. Finally seal the joints between the plate and the wall with the high temperature silicone, and then use stove furnace cement to seal between the pipe and the hole.
answered 4 months ago
by
ProductExpert7
0points
Question

installation depth

can this be installed in a fireplace that is not deep enough to mount flush? it would stick out approx 10"
asked 4 months, 2 weeks ago
by
JCinthewoods
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
This fireplace requires a minimal opening that is 28-3/4" wide x 22-5/8" high x 14-1/2" deep. It does not have to be flush.
answered 4 months, 2 weeks ago
by
ProductExpert13
0points
Question

What is the baffle made out of?

asked 10 months ago
by
Vwman2
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
The baffle is made from seat cast material.
answered 10 months ago
by
ProductExpert41
0points
Question

If my masonry opening is 18" can this unit be installed extending out of the masonry opening?

I have a 15" deep brick shelf in front of the opening.
asked 1 year, 2 months ago
by
Anonymous
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
The faceplate would need to sit flush with the fireplace. It cannot extend out from the masonry opening. The minimum opening width dimension for this insert is 28 7/8", the minimum depth would be 15 7/8" and the minimum height would be 23 3/8".
answered 1 year, 2 months ago
by
ProductExpert6
-1point
0out of 1found this answer helpful.
Question

I was just curious to how you clean the chimney, do you just sweep normally and scoop out the mess from firebox?

 
Products related to my question
"Drolet Fireplace Wood Insert, Model# DB03120"
4.7 out of 5(98)
 
 
 
 
 
asked 1 year, 4 months ago
by
Anonymous
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
2 answers
Answers
answer 1
Staff Answer
The fireplace insert would require a chimney liner. The chimney liner would be cleaned by first removing the vertical cap at the top or disconnecting it from the fireplace insert. You would use a poly propylene chimney brush along with the rod extensions to clean the liner. The firebox would need to be scooped out with an ash shovel.
answered 1 year, 4 months ago
by
ProductExpert6
+1point
1out of 1found this answer helpful.
answer 2
Yes, most of it will fall right into the fire box. Some will fall on top of the re-burn chamber. You can either use a shop vac to get most of it or shake the top portion of the chamber and it will fall off into the firebox.
answered 1 year, 3 months ago
by
04XB12s
 - Clarksburg, MD
+1point
1out of 1found this answer helpful.
Question

Will this product can be installed in non masonry opening?

I plan to use zero clearance opening with wood frame for wood stove insert. Will it be safe for me to use this product with steel flex tube in wood frame opening?
asked 1 year, 4 months ago
by
Randy8
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
This Century Heating High-Efficiency Fireplace Wood Insert cannot be installed in a non-masonry opening.
answered 1 year, 4 months ago
by
ProductExpert37
0points
Question

Is this stove non-catalytic

asked 1 year, 4 months ago
by
GKBSC1iken
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
Yes this is a non-catalytic stove insert.
answered 1 year, 4 months ago
by
ProductExpert9
0points
Question

is there a damper on this stove

asked 1 year, 4 months ago
by
rookie2
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
This wood insert does not have a damper.
answered 1 year, 4 months ago
by
ProductExpert41
+1point
1out of 1found this answer helpful.
Question

Is this clean heat; will my house get full of black soot?

asked 1 year, 4 months ago
by
PatriciaI
on "Century Heating High-Efficiency Fireplace Wood Insert - 75,000 BTU, EPA-Certified CW2900, Model# CB00006"
0points
1 answer
Answers
answer 1
Staff Answer
As long as this fireplace is properly installed it will produce clean heat with no black soot.
answered 1 year, 4 months ago
by
ProductExpert41
0points
1 2 3