Search Northern Tool

Looking for Answers about FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A?

Air Tools + Compressors(Q:1388 A:1920)
Automotive(Q:2420 A:3237)
Clothing + Work Wear(Q:136 A:157)
Construction(Q:690 A:897)
Electrical(Q:254 A:323)
Engines(Q:373 A:460)
Fans(Q:691 A:833)
Farm + Acreage(Q:752 A:890)
Food Processing(Q:298 A:418)
Generators(Q:1634 A:2296)
Hand Tools(Q:362 A:436)
Hydraulics(Q:1017 A:1125)
Lawn + Garden(Q:2518 A:3430)
Lighting(Q:194 A:236)
Logging(Q:403 A:603)
Material Handling(Q:970 A:1168)
Metal Fabrication(Q:656 A:769)
Power Tools(Q:810 A:1295)
Pressure Washers(Q:1071 A:1445)
Safety(Q:144 A:203)
Seats(Q:340 A:470)
Security Equipment(Q:270 A:400)
Snow + Ice Removal(Q:271 A:342)
Sporting Goods + Toys(Q:533 A:712)
Storage + Organizers(Q:690 A:944)
Tires + Wheels(Q:632 A:812)
Trailers + Towing(Q:1641 A:2034)
Water Pumps(Q:1157 A:1409)
Welding(Q:692 A:1110)
Winches(Q:393 A:502)

Customer Questions & Answers for
FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A

Item# 21638
This BendPak asymmetric two-post lift offers the convenience of wide or narrow installation wrapped up into one configurable package. The durable, safe and reliable car lift features an expandable top beam and Tru-Metric arms to suit virtually every vehicle-lifting requirement. The powerful and secure XPR-10A is an incredibly rapid lift with a robust menu of features to increase efficiency and productivity. It's a simple yet highly sophisticated lift designed to minimize service and maintenance costs while delivering low operating expenses and high productivity. Pad Height in. 4, Time of Full Rise seconds 45, Overall Height in. 145, Lift Capacity lbs. 10,000, Max. Rise in. 69, Motor Phases 1, Overall Width in. 132-145, Drive-Thru Clearance in. Narrow configuration 80 Wide configuration 102, HP 2, Volts 220. Revolutionary 30 rotated column offers added door-opening clearance and interior car access Exclusive Tru&#8208Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically centerline of vehicle at column or asymmetrically centerline of vehicle behind column - it's almost like having two lifts in one Expandable top beam accommodates wide or narrow drive-thru configuration Padded overhead safety shutoff bar Single-point safety release Drop-end arms provide a lower pad height Dual hydraulic direct-drive cylinders Oversized 53in. tall carriage for superior strength and durability Electric/hydraulic power system Large 17in. x 19in. A36 steel base plate Self-lubricating dura-glide UHMV polyethylene bearing system Heavy-duty 1/2in. aircraft-quality equalizer cables Oversized cable sheave diameter reduces cable fatigue Triple-telescoping arm design Includes 8-piece truck and van adapter set Versatile drop-in contact pads with stackable adapters ETL approved Item too large for lift gate, requires forklift for unloading
Customer Questions & Answers:
8 Questions
 | 
9 Answers
Product Details

Questions & Answers for FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A

Question

What are the Power Requirements? I see the voltage, but what is the amperage requirements?

asked 9 months ago
by
NTUser12
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+1point
1out of 1found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The amperage requirement for the Bendpak Asymmetric Lift is a 30 amp breaker as the lift will require 18 - 22 amps of draw.
answered 9 months ago
by
ProductExpert12
+2points
2out of 2found this answer helpful.
Question

What is the minimum ceiling height required for installation?

asked 1 year, 2 months ago
by
Anonymous
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+3points
3out of 3found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Bendpak Lift is 12'1" high. Extra room is needed between the top of the unit and the ceiling for repair purposes. There is no specific amount of clearance that is required on the top.
answered 1 year, 2 months ago
by
ProductExpert12
+2points
2out of 2found this answer helpful.
Question

Where is the max rise measured?

I am 72" tall and I noticed that the max rise for this lift is only 69". Is the measurement taken from the concrete to the underside of the lift arm or to the top of one of the lift pads or where? I would not want to have to tip my head to work underneath a vehicle. Thanks
asked 1 year, 6 months ago
by
1jesse
 - IA
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+3points
3out of 3found this question helpful.
2 answers
Answers
answer 1
Staff Answer
The max rise of 69" for this asymmetric lift is measured from the floor to the underside of the lift arm.
answered 1 year, 6 months ago
by
ProductExpert11
+6points
6out of 6found this answer helpful.
answer 2
I bought the Torin 10,000 lb 2-post lift. I measured the 78-inch max rise. It was from the floor to the top of the bubber pads that contact the vehicle. Bear in mind that you need to drop the lift down an inch or 2 from the max rise to engage the safety mechanism before you go under the vehicle.
answered 1 year, 6 months ago
by
AdrianZ
 - Massachusetts
-1point
2out of 5found this answer helpful.
Question

What are the power requirements?

asked 1 year, 7 months ago
by
Anonymous
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
-2points
0out of 2found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This Bendpak lift is a 220 volt single phase unit.
answered 1 year, 7 months ago
by
ProductExpert31
0points
1out of 2found this answer helpful.
Question

What is the spacing and bolt pattern for the pillar mounting plates?

I am building a new shop with a water heated floor, I need exact mounting dimensions in order to build footings for the Pillars. The floor is not poored yet.
asked 3 years ago
by
Boydee
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+2points
5out of 8found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This lift can be mounted on a radiant heated floor but there is a risk to puncturing the heating tubes. We recommend planning for this beforehand by clearing a space of tubing where you will be placing the lift. For further information or to acquire a bolt pattern please contact BendPak directly.
answered 1 year, 8 months ago
by
ProductExpert19
-4points
2out of 8found this answer helpful.
Question

Thickness of contrete

Will this lift accommodate a van or f350,f250 pickup truck
and a long wheelbase vehicle? Thanks in advance.
asked 2 years, 1 month ago
by
hounny
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+13points
13out of 13found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Bendpak Asymmetric Lift comes with the necessary truck and van adapters. These are ideal for trucks and vans with running boards or auxiliary fuel tanks. The minimum concrete thickness is 4 inches.
answered 2 years, 1 month ago
by
ProductExpert5
+7points
7out of 7found this answer helpful.
Question

Item 21638-1206, where is this lift manufactured

asked 2 years, 2 months ago
by
jbudb
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
-15points
1out of 17found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Bendpak lift is manufactured in China.
answered 2 years, 2 months ago
by
ProductExpert12
-17points
3out of 23found this answer helpful.
Question

how many seperate boxes is this shipped or is it shipped all a a single unit?

asked 2 years, 10 months ago
by
66666
on FREE SHIPPING - BendPak Asymmetric Lift - 10,000lb. Capacity, Model# XPR-10A
+2points
2out of 2found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The Bendpak lift is shipped with mutliple pieces in a frame work that is banded to a pallet.
answered 2 years, 10 months ago
by
ProductExpert12
+2points
2out of 2found this answer helpful.
1 of 1