The BatteryMINDer Maintainer/Desulfator keeps new batteries fresh, reconditions older ones, and maintains them for months at a time. For all lead-acid batteries, including Sealed, AGM, Gel and flooded filler caps powering electric golf cars, people movers, fork and scissor lifts, floor scrubbers and other battery electric industrial equipment. Not for aviation batteries. Charger Type Automatic, Clamp Material Nickel-plated steel, Overcharge Protection Yes, Works With Sealed and filler-cap lead-acid batteries, including Optima, Odyssey, Interstate, Exide AGM types, Case Material Polycarbonate, Charges Multiple Batteries qty. 6, Polarity Reversal Protection Yes, Dimensions L x W x H in. 5 1/2 x 5 1/2 x 2 1/4, Amps 2.7A output, Amp Charge Rate 2.7A, Cable Gauge 18 AWG, Settings qty. 3, Power Cord ft. 6, Volts 36, 120, Cable Length in. 72. Picks up where your equipment manufacturer's supplied bulk charger leaves off for lasting maintenance and desulfation Never use BatteryMINDer at the same time as your standard golf cart charger - disconnect your standard charger before using BatteryMINDer Ambient temperature sensing adds years to battery life and performance by eliminating over/under charge, regardless of temperature 0F to +130F Temperature compensation ensures proper charge in hot or cold environments temperature range of -30F to 125F Microprocessor controlled simple push-button operation with battery diagnostics indicators Maintains up to 6 batteries at a time Short circuit, spark, polarity and thermal runaway protection IMPORTANT INFORMATION ON USING PRODUCT OUTDOORS Always mount units in vertical position with cord sets exiting downward to ensure weather tight integrity. Unit must be mounted this way to ensure long term trouble-free life including weatherproof integrity. Mounting in any other manner or using unmounted parallel to ground except indoors may cause unit to fail due to water intrusion that is unable to drain correctly to avoid damage.
Customer Questions & Answers: