Search Northern Tool

Looking for Answers about Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01?

Air Tools + Compressors(Q:1388 A:1920)
Automotive(Q:2420 A:3237)
Clothing + Work Wear(Q:136 A:157)
Construction(Q:690 A:897)
Electrical(Q:254 A:323)
Engines(Q:373 A:460)
Fans(Q:691 A:833)
Food Processing(Q:298 A:418)
Generators(Q:1634 A:2296)
Hand Tools(Q:362 A:436)
Hydraulics(Q:1017 A:1125)
Lawn + Garden(Q:2518 A:3430)
Lighting(Q:194 A:236)
Logging(Q:403 A:603)
Material Handling(Q:970 A:1168)
Metal Fabrication(Q:656 A:769)
Power Tools(Q:810 A:1295)
Pressure Washers(Q:1071 A:1445)
Safety(Q:144 A:203)
Seats(Q:340 A:470)
Security Equipment(Q:270 A:400)
Snow + Ice Removal(Q:271 A:342)
Sporting Goods + Toys(Q:533 A:712)
Storage + Organizers(Q:690 A:944)
Tires + Wheels(Q:632 A:812)
Trailers + Towing(Q:1641 A:2034)
Water Pumps(Q:1157 A:1409)
Welding(Q:692 A:1110)
Winches(Q:393 A:502)
Most Recent Questions
Questions with Most Recent Answers
Question:
I purchased a mighty mule gate opener kit Model FM500-CNV, my question is what type solar panel battery charger is requred to go with the my opener
Question:
What is the diameter of the vertical rod inside the spring?
Question:
Will any brand remote opener work on this system?

Customer Questions & Answers for
Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01

Item# 188245
Open your heavy wood or steel gate easily without any sagging or dragging by installing this 8in. pneumatic rubber gate wheel. Spring suspension for use on uneven ground. 210-lb. capacity. Includes installation hardware. Axle Diameter in. 5/8, Capacity lbs. 210, Tire Size in. 8, Tire Type Pneumatic, Wheel Type Steel, Wheels qty. 1. 8in. pneumatic rubber gate wheel Spring suspension for use on uneven ground
Customer Questions & Answers:
19 Questions
 | 
26 Answers
Overall Rating:
4.026 out of 5
4
out of
5
Product Details

Questions & Answers for Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01

Question

What is the diameter of the vertical rod inside the spring?

asked 1 month ago
by
groovette
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The vertical rod in the spring is 3/4".
answered 1 month ago
by
ProductExpert19
0points
0out of 0found this answer helpful.
Question

I need to get a replacement tire and/or tire/wheel for this - do you carry or where can I find? Thanks

asked 2 months, 3 weeks ago
by
RVTA
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
For the replacement tire you would need to contact the manufacturer directly.
answered 2 months, 3 weeks ago
by
ProductExpert31
0points
0out of 0found this answer helpful.
Question

spring Capacity

can you tell me the spring capacity please? I am talking in Lbs. I understand that the tire has a 210lb capacity but what weight will the spring hold up before it bottoms out.
asked 2 months, 3 weeks ago
by
Anonymous
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The spring capacity is rated at 210lbs. The spring is capable of compressing down 3 inches before it bottoms out.
answered 2 months, 3 weeks ago
by
ProductExpert38
0points
0out of 0found this answer helpful.
Question

Can the swivel feature be disabled?

The wheel is perfect for my application with the exception of the swivel. Is there a way to fix the wheel in one position and have it remain there (NO swivel)?
asked 4 months ago
by
Lovean
 - Lakeland, FL
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
This gate wheel is designed to swivel and does not have a rigid mode capability.
answered 4 months ago
by
ProductExpert40
0points
0out of 0found this answer helpful.
answer 2
Yes, two different ways to easily fix the wheel:
1) Place a 2 1/2 SS clamp around the flat swivel plates.
or
2) Drill a 1/8 hole through the flat bearing plates and install a small metal screw
answered 3 months ago
by
well123
 - Seattle
0points
0out of 0found this answer helpful.
Question

Does the wheel fork swivel independently (bearings) from the vertical rod assembly ?

asked 1 year, 4 months ago
by
kirk27
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
Staff Answer
The fork will swivel separate from the vertical rod. It does not have bearings but has a grease fitting on wheel and swivel.
answered 1 year, 3 months ago
by
ProductExpert30
0points
0out of 0found this answer helpful.
answer 2
Yes, the fork swivels independently, but note that the vertical rod can spin in the gatewheel frame as well.
answered 1 year ago
by
jfhdfbedbnjr
 - Tennessee
0points
0out of 0found this answer helpful.
answer 3
Yes.
answered 5 months, 1 week ago
by
Mary98
 - Iowa
0points
0out of 0found this answer helpful.
Question

Do you offer a replacement wheel and tire?

asked 5 months, 3 weeks ago
by
Anonymous
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
Currently, Northern Tool and Equipment does not carry a replacement wheel and tire.
answered 5 months, 3 weeks ago
by
ProductExpert38
0points
0out of 0found this answer helpful.
Question

Do you have a bracket that can be ordered to stand the caster off from a wood gate? 

asked 1 year, 3 months ago
by
redcrane
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
There is not a bracket available for these casters.
answered 1 year, 3 months ago
by
ProductExpert5
0points
0out of 0found this answer helpful.
Question

How wide is the tire and what is the axle diameter

asked 1 year, 6 months ago
by
Anonymous
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The width of the tire is 2 1/4 inches. The tread width is 1 1/2 inches. Axle diameter is 1/4 of an inch.
answered 1 year, 6 months ago
by
ProductExpert26
0points
0out of 0found this answer helpful.
Question

Does this gate wheel come with any sort of warranty?

asked 1 year, 9 months ago
by
nuve
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This gate wheel is considered a wear item and does not come with any warranty. If you receive the item damaged or with any parts missing, we will fix or replace them.
answered 1 year, 9 months ago
by
ProductExpert29
0points
0out of 0found this answer helpful.
Question

Can this be bolted to a wooden fence?

What size are the holes of the bracket and how wide is the bracket, as in will it fit on the 11/2 part of a 2 x 4?
asked 2 years, 4 months ago
by
Anonymous
on Gate Wheel with Suspension - 210-Lb. Capacity, 8in. Pneumatic Tire, Model# CT-GW01
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
The gate wheel can be bolted to a wooden fence.

Gate wheel support brace mounting surface is 3 3/4" W x 5 1/2" H x 1/8" thick,
bolt holes are 5/16" in diameter and are 2 1/2" apart side to side and 3 7/8" from
top hole to bottom hole and 1 15/16" from top or bottom hole to the center hole.
answered 2 years, 4 months ago
by
ProductExpert6
+1point
1out of 1found this answer helpful.
answer 2
My wooden gate has the 2x4s running with the 4" side vertical with the ground. I had to make an adapter to mount the wheel further from the gate for clearance and to accommodate a larger mounting surface. The wheel bracket is 3 3/4 x 5 1/2. 6 mounting holes are 2 1/2 inches apart horizontally and 2 inches apart vertically from the centers of the holes.
answered 2 years ago
by
Dave76
 - Crowley, LA
0points
0out of 0found this answer helpful.
1 2 next>>