"This Briggs & Stratton 850 Professional-Series OHV vertical shaft engine for push mowers has ReadyStart recoil start for easy, no-prime, no-choke starts. U.S.A. Dimensions L x W x H in. 15.4 x 13 x 10, Ignition System Electronic, Fuel Tank Yes, Auto Compression Release Yes, Lubrication System Splash, Cylinder Bore Cast iron, Shaft Length in. 3 5/32, Shaft End Tapped Diameter in./Threads per inch 3/8/24, Engine Type 850 Professional-series, Bearing Type Ball on PTO end, DU on flywheel, Crankshaft 25mm x 3 5/32in., Throttle Control Remote or manual friction, Application Walk-behind mower, Fuel Pump No, Torque ft./lbs. 8.5, Max. RPM 3,100, Bore x Stroke in. 2.69 x 2.04, Flywheel Brake Yes, Carburetor Float, Shaft Output Vertical, Start Type Recoil, Low Oil Shutdown No, Shaft Diameter in. 25mm, Low Oil Alert No, Bolt Circle in. 8, Muffler Included Yes, Charging System Amps No, Oil Capacity qt. 18-20oz., Air Cleaner Type Commercial-grade w/dual seal, Cylinders qty. 1, Fuel Filter No, Cooling System Air, EPA/CARB Approval California Air Resource Board Yes, Governor System Mechanical, Fuel Tank Capacity qt. 1.6, Shaft Rotation From PTO Shaft Side CCW, Engine Displacement cc 190, Fuel Type Gasoline, Gear Reduction No, Shaft Keyway in. 2 Woodruff keys and 3/16-in. shaft keyway. 8in. bolt circle Cast iron cylinder bore Commercial-grade air filters with dual seals Large-tube muffler reduces noise levels"
Customer Questions & Answers: