Question
where does the solar panel attach?
the pics only show the light and motion attached to the wall.
where is the solar panel, how does it attach to the wall, and is there a cord to the light? or directly attached?
how many holes in the wall are drilled (HOA assocation)
asked 10 months ago
on Sunforce Solar Motion Light - 60 LED, Model# 82156
0points
0out of 0found this question helpful.
answer 1
The motion light is one piece and it has two screws and anchors that mount it horizontally. It can rotate up and down.
The solar panel has four screws and anchors that mount a small base to a wall. The panel rotates in a ball and socket mounted to this base. There is about 6 feet of cord that you must run to the actual motion light using a standard DC plug to the unit. Everything is included.
ps This light is surprisingly bright.
+3points
4out of 5found this answer helpful.
answer 2
The solar panel has a bracket that you can bolt to a wall. The mounting bracket has 2 - 4 holes. There is a wire that attaches the panel to the light.
0points
0out of 0found this answer helpful.
answer 3
Top 50 Contributor
There is a bracett that you screw to where ever you want to mount in and it has a cord.
0points
0out of 0found this answer helpful.
answer 4
The solar panel unit is seperate (in the box) and has a base attachment with 4 small holes to be attached/ screwed into any surface.
The cord is about 12 feet long and plugs into the battery unit. 2 holes screw the light and battery unit to a garage or carport. Very easy to install. Hardest part is deciding how long you want to keep your light on when its activated. 20-30 seconds is where I keep mine. Great unit..
answered 6 months ago
by
pytel
- San Antonio, Texas
+2points
2out of 2found this answer helpful.
answer 5
It plugs in and has a cord that is about 12 feet long. Bracket the the light goes in and mounts to the wall with the bracket.
answered 3 months, 2 weeks ago
0points
0out of 0found this answer helpful.
answer 6
Solar panel is separate from the light and has a separate mounting post. Light bracket is adjustable and has three mounting points, although you might get away with using just one of those if you have a solid location to screw into. The panel connects to the light with a pre-terminated plug...just plug it in and you're done. The wire is long...maybe 8 feet? Solar panel mount has 4 screw holes but you could probably use only 2 and be okay...it's not heavy.
answered 1 week, 3 days ago
by
RRRepsol
- Sealy, Texas
0points
0out of 0found this answer helpful.