"The Strong Hand Tools Multi-Axis Welder's Angle Clamp with Fixture Vise helps you hold a 3-Axis workpiece in position before welding. Just push the quick acting screws and the threaded studs will slide in and out for fast set-up and clamping of your workpiece. Hold parts in position during cool down to minimize distortion due to contraction. When the job is finished, swing away the third axis arm for easy part removal. Two stand-offs are included for faster clamping. Finish Type Nickel/chrome, Jaw Length in. 4 13/16, Material Steel. Features exclusive Quick Acting Button press and hold button and threaded spindle slides in and out for fast setup Release button and threads re-engage for tightening Accurate 90 angle Easy adjustments hold workpieces of differing thickness Swing away arm T-Handle Stand-off increases access 3.75in. miter joints per side 1.38in. jaw height 2.45in. T-clearance"
on "Strong Hand Tools Multi-Axis Welder's Angle Clamp with Fixture Vise - 3 Axis, Model# WAC35-SW"
0out of0found this question helpful.
The 3rd axis fixture arm should not be removed from this Strong Hand welders clamp. It is calibrated at the factory to be exactly 90 degrees.
answered 3 years, 7 months ago
0out of0found this answer helpful.
Top 10 Contributor
The third axis arm can be removed, but it is NOT convenient, NOR IS IT REQUIRED. The arm is mounted on a shaft and has a torsion spring that rotates the arm and clamp out of the way above the fixture when it is not being used. The welding zone is fully accessible for both two and three axis work with no modifications. This is an incredibly well thought out machine.