answer 1
To operate you must press and hold the POWER button and push the ram lever. Requires both hands to operate.
answered 1 year, 3 months ago
by
Raymo9997
- Dallas, Tx
+1point
1out of 1found this answer helpful.
answer 2
If you have the Owners Manual and you need more info I can't help you. Otherwise, Plug it in. Open theBbleed Screw (top backside) several turns (should feel air flow when operating. Place log in carriage. Push and hold the Switch Button (green on mine), push the Hydraulic Control Lever in (they both have to be depressed at the same time).. This should split the log. Release lever and button. Repeat. When finished, close Bleed Screw and unplug.
answered 1 year, 2 months ago
-1point
1out of 3found this answer helpful.
answer 3
May I suggest viewing the owner's manual which is listed at the bottom of the description tab on the web page.
+1point
1out of 1found this answer helpful.
answer 4
1. Push and hold the electric motor start button. Hydraulic fluid is then being pumped "sump to Sump"
2. Depress the hydraulic valve lever. Hydraulic fluid is the directed to the splitters ram cylinder and splits the log.
3. Release the start button and the valve lever and the splitter ram will reset.
answered 5 months, 3 weeks ago
0points
0out of 0found this answer helpful.
answer 5
After placing the log on the track, using the right hand to press the momentary motor power button and hold it to keep the motor running. With the left hand push and hold the acuator lever to activate the ram until the log splits and the ram reaches maximum extension. Release the acuator lever and power button. The motor will stop and the ram will auto retract.
answered 5 months, 1 week ago
0points
0out of 0found this answer helpful.