Search Northern Tool
Looking for Answers about ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI?
Customer Questions & Answers for
ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
Item# 159185
Add flexibility to your air compressor with a smooth-operating ReelWorks hose reel. Industrial-grade reel includes 50ft. rubber air hose. Max. 300 PSI working pressure. Automatic rewind makes hose return a snap. Easy to install on a wall or ceiling. Hose Fitting Size (in. NPT): 3/8, Hose Diameter (in.): 3/8, Hose Length (ft.): 50, Max. PSI: 300, Material Type: Rubber hose, Steel construction, Dimensions L x W x H (in.): 15 3/8 x 7 1/8 x 16 7/8, Hose Application: Air, Reel Capacity (Hose Length ft. x Hose Diameter in.): 50 x 3/8, Hose Included: Yes, Hose Temp Range (°F): -4-140 Mounting bracket hole pattern: 4in. apart (width), 5in. apart (length) Heavy-duty rubber stop is adjustable for safe usage Four direction non-snag rollers reduce hose wear abrasion Mounts on wall, floor or ceiling Heavy-duty powder-coated steel constructed wheel
Questions & Answers for ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
Question
Questions for ReelWorks Reel 3/8" x 50'
1. Is there a leader hose? If yes, what length is it?
2. Once you pull the hose out, will it stay out until you snap the line to retract?
3. Can the hose with the reel be replaced with a rubber hose?
Thanks
2. Once you pull the hose out, will it stay out until you snap the line to retract?
3. Can the hose with the reel be replaced with a rubber hose?
Thanks
asked 1 year, 5 months ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
MacCamper
+1point
1out of 1found this question helpful.
6 answers
Answers
answer 1
This item does not include a leader hose. The reel will "ratchet" and hold the hose into position until it is retracted. The hose that comes on this reel is red rubber. It could be replaced with another hose that has 3/8" NPT ends.
answered 1 year, 5 months ago
by
ProductExpert13
-1point
0out of 1found this answer helpful.
answer 2
1. No lead hose is included. I made my own from a 50 foot hose (cut to length).
2. It works like a retractable extension cord meaning it locks when you stop pulling and then retracts when you pull out some more and let it go back. There's a little bit of a trick to getting it to lock but you figure it out after a few uses.
3. I would think so since the hose is threaded but I've not had to do this yet.
2. It works like a retractable extension cord meaning it locks when you stop pulling and then retracts when you pull out some more and let it go back. There's a little bit of a trick to getting it to lock but you figure it out after a few uses.
3. I would think so since the hose is threaded but I've not had to do this yet.
answered 1 year, 4 months ago
by
InTheGarage1234
- Central NY
0points
0out of 0found this answer helpful.
answer 3
1. There is no leader hose.
2.Yes it will stay.
3.Yes you can replace the hose.
2.Yes it will stay.
3.Yes you can replace the hose.
answered 1 year, 2 months ago
by
Automotive
- Minnetonka, MN
0points
0out of 0found this answer helpful.
answer 4
No leader hose. Yes it stays out like a retactable shop power cord. It is a rubber hose.
answered 1 year, 2 months ago
by
Pepsirich
- Georgia
0points
0out of 0found this answer helpful.
answer 5
No leader hose but easy to get to fitting.
this hose will stop (if you want) on every rotation. So any length is available. Retracts after another simple pull.
No need to replace the hose, The one that comes with this unit is fine.
this hose will stop (if you want) on every rotation. So any length is available. Retracts after another simple pull.
No need to replace the hose, The one that comes with this unit is fine.
answered 11 months ago
by
Dave11Wellsboro
- Wellsboro, PA
0points
0out of 0found this answer helpful.
answer 6
1. The hose reel has an adjustable rubber stopper which can be placed at any part of the hose. This allows you to mount the reel high up in the air and hand the hose down for access.
2. Yes, the reel has 6 notches/stops on it. You pull on the hose and you can hear it click and the hose will stay out until you pull on the hose to release the stop and the hose will retract.
3. I have never replaced a hose on a reel. Can't help you out on this one.
2. Yes, the reel has 6 notches/stops on it. You pull on the hose and you can hear it click and the hose will stay out until you pull on the hose to release the stop and the hose will retract.
3. I have never replaced a hose on a reel. Can't help you out on this one.
answered 11 months ago
by
tmo6979
0points
0out of 0found this answer helpful.
Question
how do you increase spring tench en?
asked 1 year, 8 months ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
Anonymous
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
For safety reasons the spring tension on this unit is not made to be adjusted.
answered 1 year, 8 months ago
by
ProductExpert13
0points
0out of 0found this answer helpful.
answer 2
You disconnect the return stop bumper from the hose. Feed the hose back through the hose fairlead rollers and rotate the reel a few complete turns (clockwise) to tighten the spring. Do one rotation at a time because you don't want to overtension the spring. One or two should do it. Then refeed the hose back through the fairlead rollers and reinstal the rubber stop on the hose.
answered 1 year, 6 months ago
by
Jeeping
0points
0out of 0found this answer helpful.
answer 3
Top 100 Contributor
It's actually listed in the literature with the reel. You remove the stop from the hose, pull it around and install the stop again to increase the tension. The tension is actually pretty good as is though.
answered 1 year, 2 months ago
by
FedByFuel
- Snellville, GA
0points
0out of 0found this answer helpful.
answer 4
remove the guard on the end of the hose and roll it backward until it is as tight as you need.
answered 1 week, 1 day ago
by
CLToy
- Charleston, WV
0points
0out of 0found this answer helpful.
Question
what are the demensions of the reel?
asked 1 year, 11 months ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
Anonymous
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
The dimensions are 16-1/2"L X 7-7/8"WX 17-5/8"H.
answered 1 year, 11 months ago
by
ProductExpert7
0points
0out of 0found this answer helpful.
answer 2
17.5" from bracket top
16.5" round
5" thick
16.5" round
5" thick
answered 1 year, 8 months ago
by
mhpoppy
- La.
0points
0out of 0found this answer helpful.
answer 3
about 16"X4 for just the reel, bracket and hose guide adds a little.
answered 1 year, 8 months ago
by
z282z06
- CT
0points
0out of 0found this answer helpful.
Question
Are piece parts available for this unit?
In particular I am curious if seals and small parts are available for this air reel?
asked 1 year, 3 months ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
LeeF
- GA
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Please call our parts department @ 1-800-222-5381 for parts pricing and availability.
answered 1 year, 3 months ago
by
ProductExpert19
0points
0out of 0found this answer helpful.
answer 2
Top 100 Contributor
I, am not sure , but I have had one for 2 for 5 years now and use them regulary with no leaks??
answered 1 year, 2 months ago
by
balernbud
- Wi
0points
0out of 0found this answer helpful.
Question
Origion
Where was it manufactured?
asked 5 months ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
This is manufactured in China.
answered 5 months ago
by
ProductExpert7
0points
0out of 0found this answer helpful.
answer 2
Sticker stated China
answered 4 months ago
by
mikeyd616
- Knoxville, TN
0points
0out of 0found this answer helpful.
Question
100' hose fit?
i have this reel and need to replace the hose. i want to put at 100' hose on it. the hose i want to buy is thiner than the stock hose. will it work on this reel? im thinking all ill need to do is make the spring tighter with a turn or two.
asked 1 year, 1 month ago on ReelWorks Air Hose Reel With Hose - 3/8in. x 50ft. Hose, Max. 300 PSI
by
cherokee86U
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The recommended hose for this product is 3/8" x 50'.
answered 1 year, 1 month ago
by
ProductExpert25
0points
0out of 0found this answer helpful.
1 of 1