Search Northern Tool
Looking for Answers about AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K?
Customer Questions & Answers for
AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K
Item# 155001
The AirCat® 1/2in. impact wrench has a tough Kevlar® composite body for the ultimate in durability, strength and comfort. Delivers up to 1100 ft.-lbs. of loosening torque. Kevlar is a trademark of the I.E. DuPont® Co and its assigns. Drive (in.): 1/2, Speed - No Load (RPM): 9,000, Average Air Consumption (CFM): 4, Operating PSI: 90-120, Working Torque (ft.-lb.): 200-950, Max. Torque (ft.-lbs.): 1,100, Impacts Per Minute (IPM): 1,350, Hammer Mechanism: Twin, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Noise Level (dB): 86, Tool Weight (lbs.): 4.5, Tool Length (in.): 7 1/2, Case Included: No
Questions & Answers for AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K
Question
will this impact wrench remove 18 wheeler lug nuts
asked 1 year, 6 months ago on AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K
by
Anonymous
0points
0out of 0found this question helpful.
6 answers
Answers
answer 1
The Aircat model #1100-K has a working torque range of 200-900 ft. lbs. with a max of 1100 ft. lbs. This should be enough to remove 18 wheeler lug nuts.
answered 1 year, 6 months ago
by
ProductExpert27
+1point
1out of 1found this answer helpful.
answer 2
Its possible but if it does, the lug nuts should be tighter. I have a hard time getting some of them off with a 1 inch drive IR gun.
answered 1 year, 6 months ago
by
Jakep
- Fort Bragg, CA
0points
1out of 2found this answer helpful.
answer 3
It should without any problems
answered 1 year, 6 months ago
by
Bowhuntinfool
- Central Wisconsin
0points
0out of 0found this answer helpful.
answer 4
All the truck shops I've ever worked in use a 1" impact dedicated for tire work. I won't say this gun couldn't, but it would not be my first choice for something as critical as lug nut safety.
answered 1 year, 3 months ago
by
Brishar
- Palm Harbor, Fl.
0points
0out of 0found this answer helpful.
answer 5
I have never tried, but based on my usage I would say yes. It rips lugs torqued to well over 180 ft lbs with little strain.
answered 1 year, 2 months ago
by
rmerchant3
0points
0out of 0found this answer helpful.
answer 6
it will but you should probably get the 3/4" drive due to socket size. You will have to have use adapters allot for the 3/4 drive sockets.
answered 11 months ago
by
Woodzy
0points
0out of 0found this answer helpful.
Question
is this model a twin hammer gun
i am asking about the aircat 1/2 inch impact gun model # 1100k, item #155001-2101
asked 1 year, 2 months ago on AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K
by
Anonymous
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
Yes, this AirCat impact wrench is a twin hammer unit.
answered 1 year, 2 months ago
by
ProductExpert11
0points
0out of 0found this answer helpful.
answer 2
Yes
answered 1 year, 2 months ago
by
Donotbuy
0points
0out of 0found this answer helpful.
answer 3
yes it is, according to aircat website.
answered 11 months ago
by
Woodzy
0points
0out of 0found this answer helpful.
answer 4
Yes it is!
answered 7 months ago
by
Boomer1961
- Detroit Lakes, MN
0points
0out of 0found this answer helpful.
Question
Where is the aircat made and where can I have it repaired if and when it fails?
asked 1 year, 2 months ago on AirCat Composite Impact Wrench - 1/2in. Drive, Kevlar, Model# 1100-K
by
mitchchris
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The AirCat wrench is made in Taiwan and under warranty for 2 yrs. If you would need repairs the have service centers throughout the US and they may be reached via their site www.aircat.com. Northern also offers a full replacement plan on the impact wrench that would extended the warranty and included accidental damage.
answered 1 year, 2 months ago
by
ProductExpert10
0points
0out of 0found this answer helpful.
1 of 1