Search Northern Tool

Looking for Answers about Ingersoll Rand Air Angle Grinder - 5n., Model# 422G?

Automotive(Q:2404 A:3216)
Clothing + Work Wear(Q:137 A:159)
Construction(Q:678 A:887)
Electrical(Q:256 A:322)
Engines(Q:366 A:448)
Fans(Q:723 A:893)
Farm + Acreage(Q:799 A:935)
Food Processing(Q:295 A:406)
Generators(Q:1671 A:2330)
Hand Tools(Q:368 A:441)
Hydraulics(Q:1004 A:1107)
Lawn + Garden(Q:2524 A:3438)
Lighting(Q:211 A:260)
Logging(Q:482 A:827)
Material Handling(Q:975 A:1176)
Metal Fabrication(Q:643 A:751)
Power Tools(Q:830 A:1333)
Pressure Washers(Q:1057 A:1420)
Safety(Q:142 A:198)
Seats(Q:336 A:462)
Security Equipment(Q:282 A:414)
Snow + Ice Removal(Q:264 A:334)
Sporting Goods + Toys(Q:524 A:701)
Storage + Organizers(Q:680 A:926)
Tires + Wheels(Q:621 A:797)
Trailers + Towing(Q:1670 A:2073)
Water Pumps(Q:1140 A:1381)
Welding(Q:640 A:952)
Winches(Q:395 A:505)
Most Recent Questions
Recent Question:
is the variable speed controlled at the tool or by a regulator at the compresser
Recent Question:
Is there a 1/8" collet available for this grinder so that dremel stones can be used?
Recent Question:
can this gun use standard culk tubes?
Recent Question:
What staple gun do you recommend for these staples?
Questions with Most Recent Answers
Question:
is this a front exhaust or rear exhaust unit? Item # 1540330-2201
Question:
Is there a 1/8" collet available for this grinder so that dremel stones can be used?
Question:
is the variable speed controlled at the tool or by a regulator at the compresser
Question:
Can this gun shoot rounded staples?

Customer Questions & Answers for
Ingersoll Rand Air Angle Grinder - 5n., Model# 422G

Item# 154385
The Ingersoll Rand Air Angle Grinder is the perfect choice for high-performance finishing. The 422G combines a unique motor controller that virtually eliminates over-speeding. The powerful 1 HP motor provides plenty of power for rust and material removal. Tool Length in. 8 15/16, Tool Weight lbs. 4.1, Variable Speed Yes, Side Handle Yes, Speed RPM 12,000, Air Inlet Size in. NPT 1/4, CFM at Load 22, Disc Diameter in. 5, Min. Hose Size in. 3/8, Air Consumption CFM 6. 1 HP motor Front exhaust Comfort grip for improved ergonomics
Customer Questions & Answers:
1 Question
 | 
3 Answers
Overall Rating:
5 out of 5
5
out of
5
Product Details

Questions & Answers for Ingersoll Rand Air Angle Grinder - 5n., Model# 422G

Question

Arbor Size ?

What size should the hole in the disc be ? How does it mount? Is it quick disconnect?
asked 4 years ago
by
Rodolfo
 - Westport CT
on Ingersoll Rand Air Angle Grinder - 5n., Model# 422G
+1point
1out of 1found this question helpful.
3 answers
Answers
answer 1
Staff Answer
It has a 5/8 arbor. First must remove the nut that holds the disc on then put your disc on the replace the nut.
answered 3 years, 9 months ago
by
ProductExpert27
+2points
2out of 2found this answer helpful.
answer 2
It has a 5/8 arbor, remove first nut install wheel, reinstall nut. for grinding wheels the raised lip goes toward the disc. For cut-off wheels the recessed side goes toward disc. Yes it is quick disconnect.
answered 3 years, 9 months ago
by
stesmi63
 - Mckinney Tx.
+2points
2out of 2found this answer helpful.
answer 3
5/8" arbor uses pin wrench and arbor wrench (included) to change disc. Mounts with the included nut that can be flipped if you use a cutting disc. Will use both 5" and 4.5" discs,flappers etc, available at any welding or tool supply store. Quick disconnect when used with the proper air connectors.
answered 3 years, 2 months ago
by
inmac
 - portland,or.
+2points
2out of 2found this answer helpful.
1 of 1