Search Northern Tool
Looking for Answers about Ingersoll Rand Air Angle Grinder - 5n., Model# 422G?
Customer Questions & Answers for
Ingersoll Rand Air Angle Grinder - 5n., Model# 422G
Item# 154385
The Ingersoll Rand Air Angle Grinder is the perfect choice for high-performance finishing. The 422G combines a unique motor controller that virtually eliminates over-speeding. The powerful 1 HP motor provides plenty of power for rust and material removal. Air Inlet Size (in. NPT): 1/4, Disc Diameter (in.): 5, Air Consumption (CFM): 6, CFM at Load: 25, Speed (RPM): 12,000, Min. Hose Size (in.): 3/8, Variable Speed: Yes, Side Handle: Yes, Tool Weight (lbs.): 4.1, Tool Length (in.): 8 15/16 1 HP motor Front exhaust Comfort grip for improved ergonomics
Questions & Answers for Ingersoll Rand Air Angle Grinder - 5n., Model# 422G
Question
Arbor Size ?
What size should the hole in the disc be ? How does it mount? Is it quick disconnect?
asked 1 year, 8 months ago on Ingersoll Rand Air Angle Grinder - 5n., Model# 422G
by
Rodolfo
- Westport CT
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
It has a 5/8 arbor, remove first nut install wheel, reinstall nut. for grinding wheels the raised lip goes toward the disc. For cut-off wheels the recessed side goes toward disc. Yes it is quick disconnect.
answered 1 year, 5 months ago
by
stesmi63
- Mckinney Tx.
+1point
1out of 1found this answer helpful.
answer 2
It has a 5/8 arbor. First must remove the nut that holds the disc on then put your disc on the replace the nut.
answered 1 year, 5 months ago
by
ProductExpert27
+1point
1out of 1found this answer helpful.
answer 3
5/8" arbor uses pin wrench and arbor wrench (included) to change disc. Mounts with the included nut that can be flipped if you use a cutting disc. Will use both 5" and 4.5" discs,flappers etc, available at any welding or tool supply store. Quick disconnect when used with the proper air connectors.
answered 11 months ago
by
inmac
- portland,or.
+1point
1out of 1found this answer helpful.
1 of 1