Search Northern Tool
Looking for Answers about Northern Industrial Tire/Wheel - 26in., Spoked?
Customer Questions & Answers for
Northern Industrial Tire/Wheel - 26in., Spoked
Item# 145123
Pneumatic tire on wheel can be used to build your own cart, replace wheels on your existing cart or in a variety of different ways. It has a weight rating of 300 lbs. 3/4in. dia. bearing. Spoke Diameter: 1/8in. Tire Type: Pneumatic, Rim Type: Spoked, Tire Size (in.): 26 x 2 1/8, Tread Type: Knobby, Hub Width (in.): 4 1/2, Bore Diameter (in.): 3/4, Outside Diameter (in.): 26, Load Capacity (lbs.): 300, Bearings Included: Yes Sturdy spoked wheel handles the roughest terrain Heavy-duty 300-lb. load capacity
Questions & Answers for Northern Industrial Tire/Wheel - 26in., Spoked
Question
Any mounting hardware included?
Does Northerntool sell an axle asembly for this wheel?
asked 1 year ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Anonymous
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
No, this Northern Industrial tire and wheel does not include any mounting hardware, and at this time we do not offer an axle that will fit the wheel.
answered 1 year ago
by
NITExpert11
0points
0out of 0found this answer helpful.
answer 2
no axel or mounting hardware available
answered 11 months ago
by
rebeccam35
- Grants Pass, OR
0points
0out of 0found this answer helpful.
answer 3
It is easy to make mounting hardware if you have access to a drill press and steel cutoff saw. You buy 3/4 inch rod, cut it to length with saw, then make small nicks near each end with cutoff saw to start the retaining pin holes. Then drill holes in the nicks... depression makes it easy to start them.
Presto Pins (google image if needed) work well in the holes. If no suspension is ok, then a single solid axle under a wagon works well, and you simply drill holes in each side of frame for the rod.
Presto Pins (google image if needed) work well in the holes. If no suspension is ok, then a single solid axle under a wagon works well, and you simply drill holes in each side of frame for the rod.
answered 3 months, 1 week ago
by
davidx
0points
0out of 0found this answer helpful.
Question
What type metal are the wheels and spokes?
Aluminum, Steel, Stainless Steel?
Products related to my question
asked 1 year, 3 months ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Anonymous
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
The rim and spokes on this wheel are both made of steel.
answered 1 year, 3 months ago
by
NITExpert5
+1point
1out of 1found this answer helpful.
answer 2
Steel w/zinc plating for rust prevention
answered 11 months ago
by
rebeccam35
- Grants Pass, OR
+1point
1out of 1found this answer helpful.
answer 3
steel.
answered 7 months ago
by
Cwolf88
- Williamsburg
+1point
1out of 1found this answer helpful.
Question
Is the bearing 3/4 inside diamenter, where the axle goes or 3/4 outside diamenter.
asked 10 months ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Middleman
+1point
1out of 1found this question helpful.
3 answers
Answers
answer 1
This Northern Industrial tire/wheel has a bearing with a 3/4 inch inside diameter, so it will accommodate a 3/4 inch axle.
answered 10 months ago
by
NITExpert11
+1point
1out of 1found this answer helpful.
answer 2
The hole in the bearing assembly is 3/4"
answered 7 months ago
by
Cwolf88
- Williamsburg
0points
0out of 0found this answer helpful.
answer 3
You need a 3/4" diameter axle, the inside diameter (ID) of the bearing.
answered 1 month, 2 weeks ago
by
Insagor
- hartford, wi
0points
0out of 0found this answer helpful.
Question
Are these supplied with tubes or are they tubeless?
asked 2 months ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Zimco
- Massachusetts
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
This tire/wheel comes with one tube.
answered 2 months ago
by
NITExpert11
0points
0out of 0found this answer helpful.
answer 2
I ordered two wheels, they came with tubes, just like a typical mountain bike tire and tube.
answered 1 month, 2 weeks ago
by
Insagor
- Hartford, Wisconsin
0points
0out of 0found this answer helpful.
Question
Can I get a replacement bearing for this wheel?
asked 9 months ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Anonymous
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Yes, please see the bearings that fit this Northern Industrial tire/wheel listed below...
answered 9 months ago
by
NITExpert11
0points
0out of 0found this answer helpful.
Question
Are these imported or US made?
asked 2 weeks, 5 days ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
not4me
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The Northern Industrial 26in Tire/Wheel is made in Taiwan.
answered 2 weeks, 4 days ago
by
NITExpert29
0points
0out of 0found this answer helpful.
Question
How easy is it to change out the bearing to a 1/2" bearing? Can you supply with 1/2" instead of 3/4"?
asked 1 month, 2 weeks ago on Northern Industrial Tire/Wheel - 26in., Spoked
by
Anonymous
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The process of replacing this type of bearing is quite easy. Only some small tools and approximately an hours worth of time is required depending on your ability for this type of work. We do offer a 1/2" bushing that is shown below.
answered 1 month, 2 weeks ago
by
NITExpert12
0points
0out of 0found this answer helpful.
1 of 1