Search Northern Tool

Looking for Answers about Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306?

Air Compressors(Q:739 A:979)
Air Tools(Q:536 A:793)
Auto Repair(Q:855 A:1137)
Air Conditioning(Q:3 A:3)
Auto Body Repair(Q:63 A:77)
Automotive Lifts(Q:159 A:192)
Brake Repair(Q:7 A:8)
Creepers(Q:15 A:19)
Exhaust Tools(Q:1 A:1)
Fuel Line Tools(Q:2 A:2)
Jacks(Q:302 A:456)
Spark Plug Tools(Q:7 A:10)
Specialty Tools(Q:25 A:29)
Spray Booths(Q:2 A:2)
Tire Equipment(Q:121 A:149)
Wheel Chocks(Q:8 A:13)
Wheel Dollies(Q:14 A:19)
Casters(Q:145 A:168)
Clothing + Work Wear(Q:106 A:123)
Commercial Trucking(Q:55 A:59)
Construction(Q:293 A:383)
Electrical(Q:243 A:295)
Engines(Q:345 A:417)
Fans(Q:709 A:860)
Farm + Acreage(Q:734 A:852)
Food Processing(Q:278 A:372)
Gauges(Q:33 A:44)
Generators(Q:1642 A:2305)
Gloves(Q:12 A:14)
Grounds Maintenance(Q:1705 A:2257)
Hand Tools(Q:339 A:412)
Hydraulics(Q:897 A:977)
Lighting(Q:184 A:241)
Logging(Q:590 A:1069)
Material Handling(Q:784 A:939)
Measuring Tools(Q:91 A:97)
Metal Fabrication(Q:577 A:666)
Outdoors(Q:482 A:625)
Painting(Q:153 A:226)
Parts Washers(Q:70 A:94)
Power Tools(Q:823 A:1340)
Pressure Washers(Q:1053 A:1391)
Ramps(Q:88 A:117)
Safety(Q:130 A:173)
Seats(Q:251 A:315)
Security Equipment(Q:277 A:388)
Snow + Ice Removal(Q:254 A:329)
Sporting Goods(Q:420 A:555)
Storage + Organizers(Q:557 A:617)
Tires + Wheels(Q:571 A:719)
Towing(Q:233 A:271)
Trailers + Trailer Parts(Q:1282 A:1588)
Water Pumps(Q:1119 A:1355)
Welding(Q:717 A:1150)
Winches(Q:386 A:495)
Woodworking(Q:72 A:84)
Most Recent Questions
Questions with Most Recent Answers

Customer Questions & Answers for
Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306

Item# 144878
Heat-treated chrome ram for strength and durability. 100 factory load-tested for reliability and safety. Meets ASME PALD safety standards. Min. Lift Height in. 24 3/8, Lift Capacity tons 3, Max. Lift Height in. 43 7/8, Pistons qty. 1, Base L x W in. 4 3/4 x 4 9/16. Vertical use only
Customer Questions & Answers:
12 Questions
 | 
14 Answers
Overall Rating:
4.722 out of 5
4.7
out of
5
Product Details

Questions & Answers for Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306

Question

What is the space between the mounting tabs at the bottom?

How wide is the gap between the bottom mounting tabs?
asked 4 days ago
by
Anonymous
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The space between the tabs of the clevis is .75".
answered 3 days ago
by
ProductExpert10
0points
0out of 0found this answer helpful.
Question

Is there a rebuild kit (O-rings & etc) for these rams?

asked 1 year, 7 months ago
by
Anonymous
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
A rebuild kit for this hydraulic jack is not available from Northern Tool. Replacement parts are available from the manufacturer.
answered 1 year, 7 months ago
by
ProductExpert11
0points
0out of 0found this answer helpful.
Question

What is the inside distance between lower pin mounting tabs & distance across flats on shaft pin hole?

asked 1 year, 9 months ago
by
RileyW
 - Vernon, Ca
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The closed pin center distance is 24 11/16" inches the hydraulic ram casing diameter is 2 7/8" inches and the mounting holes are 5/8" inches and would take up to a 3" inch bolt minimum.
answered 1 year, 9 months ago
by
ProductExpert10
-1point
0out of 1found this answer helpful.
Question

What is the diameter of the jack cylinder body?

asked 1 year, 10 months ago
by
Anonymous
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The diameter of this jack cylinder body is 4.55 inches.
answered 1 year, 10 months ago
by
ProductExpert31
0points
0out of 0found this answer helpful.
Question

will this jack function at an angle of 45 degrees?

asked 2 years, 5 months ago
by
cwagg
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
This item is intended to be used in a vertical position with very little inclination due to loss of hydraulic fluid.
answered 2 years, 5 months ago
by
ProductExpert10
0points
0out of 0found this answer helpful.
Question

Can this jack be used with either end up?

One of the answers stated that the jack must be used vertically, but it didn't state what amount of inclination is acceptable (many lifts have the ram at 45˚ or less). Nor does does the previous answer indicate whether either end can be upwards in the vertical orientation. And if some amount of inclination is acceptable, does the pumping handle need to be in a specific orientation? For example, if the ram can be mounted on a lift at 30 degrees from vertical (60 degrees from horizontal), with the pumping mechanism at the bottom end of the ram, does the pumping mechanism also need to be oriented in a specific way, for example, on the left side, right side, top side, or underside of the cylinder?
asked 2 years, 8 months ago
by
Nekoninda
 - New Mexico
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The manufacturer does not recommend any degree of inclination. They are intended to be used in a vertical position with very little inclination due to loss of hydraulic fluid.
answered 2 years, 8 months ago
by
ProductExpert12
0points
0out of 0found this answer helpful.
Question

Can this jack be operated horizontal?

asked 3 years, 3 months ago
by
Anonymous
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
The Torin long ram jacks are intended to be operated in a vertical position.
answered 3 years, 3 months ago
by
ProductExpert27
0points
0out of 0found this answer helpful.
answer 2
no
answered 3 years ago
by
timberking
0points
0out of 0found this answer helpful.
Question

where was this item made ?

asked 3 years, 4 months ago
by
Anonymous
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Staff Answer
This Torin jack is made in China.
answered 3 years, 4 months ago
by
ProductExpert19
+1point
1out of 1found this answer helpful.
answer 2
Item was made in China.
answered 3 years, 1 month ago
by
handyman10
 - farragut, Iowa
+1point
1out of 1found this answer helpful.
Question

How wide are the tabs the bottom bolt goes through?

or
How wide are the ears where you bolt the bottom on? My hoist only has 2" of room, will this fit?
asked 3 years, 1 month ago
by
Anonymous
 - Nevada
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The width of the ears where the pin goes through is 2 1/4".
answered 3 years, 1 month ago
by
ProductExpert12
0points
0out of 0found this answer helpful.
Question

What is ram shaft size (dia.) and Hole size in ram and base?

asked 3 years, 3 months ago
by
GeoB
 - Ogden, Utah
on Torin Long Ram Hydraulic Jack - 3-Ton, Model# T30306
+1point
1out of 1found this question helpful.
1 answer
Answers
answer 1
Staff Answer
The ram shaft is 1" and the bolt holes are 5/8".
answered 3 years, 3 months ago
by
ProductExpert6
+1point
1out of 1found this answer helpful.
1 2 next>>