Search Northern Tool
Looking for Answers about Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G?
See all Northern Tool Questions and Answers >
Trailers + Trailer Parts Q & A >
Trailer Lift Gates Q & A
Customer Questions & Answers for
Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
Item# 143892
The Gorilla-Lift is a revolutionary product that takes 100% of the weight off heavy utility trailer tailgates or ramps, enabling them to raise or lower with virtually no effort. Features 2-sided assist and recommended for tailgates 4- to 6-ft. tall with a maximum weight of 300 lbs. Side rails can be square tube, round tube or angle iron. Can extend life of trailer gate. Compatible With: Lift gates, Load Capacity (lbs.): 300, Overall Width (in.): 2, Height (in.): 2, Material Type: Steel with powder coat finish Raise or lower trailer tailgates with almost no effort Adjusts for different sizes and weights of tailgates Lighter tailgates will not pop up off the ground and heavier tailgates will not fall to ground Fully encloses lifting system inside a housing Attaches to your trailer quickly and easily Each measures 2in. x 2in. x 72in.L
Questions & Answers for Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
Question
Are these easy to install?
asked 1 year ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Bigfun
- St. Louis, MO
0points
0out of 0found this question helpful.
9 answers
Answers
answer 1
According to the reviews linked on the webpage, the Tailgate Lift Assist is easily installed.
answered 1 year ago
by
ProductExpert27
0points
0out of 0found this answer helpful.
answer 2
Pretty easy. You have to drill 2 holes in the top framing on each side and 1 hole in the tailgate on each side
answered 11 months ago
by
4850kurt
- Atlanta, GA
0points
0out of 0found this answer helpful.
answer 3
It's as easy as reading the instructions, and drilling the mounting holes, and running a ratchet. Be sure to follow the hint for attaching to the gates, as it will probably save you having to drill a 2nd set of holes.
answered 11 months ago
by
thomcat
- Duke Center, PA
0points
0out of 0found this answer helpful.
answer 4
yes....but make sure you have a good drill bit as the square tube is heavy duty.
answered 11 months ago
by
rknothead
- Traverse City, MI
0points
0out of 0found this answer helpful.
answer 5
Hello
Mounting was easy but streaching the cables was tough !
Mounting was easy but streaching the cables was tough !
answered 11 months ago
by
FNCYOLCAR
0points
0out of 0found this answer helpful.
answer 6
I didn't have any problems with installing the system. The biggest thing that you have to make sure your doing right, is marking the holes prior to drilling. Drilling the holes is really the hardest part of the whole install. Good Luck~
answered 7 months ago
by
Jonati
- Cincinnati, OH
0points
0out of 0found this answer helpful.
answer 7
extremely easy, if you have a drill, bits and wrenches install is a snap, shouldn't take more than 30 minutes. Once you get the jest of installation on the 1st one, the 2nd is a breeze.
answered 7 months ago
by
zilla68
- moore oklahoma
0points
0out of 0found this answer helpful.
answer 8
Very easy, about 1 hour to install...
answered 7 months ago
by
gary333
- Galesburg, MI.
0points
0out of 0found this answer helpful.
answer 9
This Kit was much easier than I expected. Just follow the instructions and you will have no problems.
answered 7 months ago
by
LFW1947
- Bonifay, Florida
0points
0out of 0found this answer helpful.
Question
HOW long are the rails?
I have a 12 ft trailer with trimmer racks on both sides, how long are the rails?
asked 1 year, 11 months ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Anonymous
0points
0out of 0found this question helpful.
5 answers
Answers
answer 1
The rails on the tailgate lifts are 72 inches long, it is recommended for trailer tailgates 4 to 6 feet tall, and a maximum tailgate weight of 300 pounds.
answered 1 year, 11 months ago
by
ProductExpert11
+2points
2out of 2found this answer helpful.
answer 2
the rails are 6 ft long and made in two 3 ft sections. They are made of 2 X 2 square tubing with a mounting bolt hole at each end.
On my 6 X 10 trailer I had a truck box tool box mounted over the side rail and fender on one side. To install the lift rail on that side I modified the box mounts to raise the box 2 inches so now it rests just above thelift rail.
On my 6 X 10 trailer I had a truck box tool box mounted over the side rail and fender on one side. To install the lift rail on that side I modified the box mounts to raise the box 2 inches so now it rests just above thelift rail.
answered 1 year, 5 months ago
by
mepins
- Santee, ca
0points
0out of 0found this answer helpful.
answer 3
hello,
You will need 6' of flat top rail to mount the lift spring/cable holder. It needs to be near the rear of the trailer.
You will need 6' of flat top rail to mount the lift spring/cable holder. It needs to be near the rear of the trailer.
answered 11 months ago
by
FNCYOLCAR
+1point
1out of 1found this answer helpful.
answer 4
I want to say they are 6 ft long, maybe 2-3 foot sections. Trimmer racks shouldn't be an issue, since the bolts go thru the inside of the tube. I have trimmer racks on mine, as well as back pack blower racks and I had no issues, but it is sure a back saver after a long day of mowing
answered 7 months ago
by
zilla68
- moore oklahoma
0points
0out of 0found this answer helpful.
answer 5
The rails are about 6 foot long.
answered 7 months ago
by
LFW1947
- Bonifay, Florida
0points
0out of 0found this answer helpful.
Question
can this lift be used on a split tail gate
asked 10 months ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Anonymous
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
The tailgate lift assist will work with a split tail gate up to 150 pound capacity.
answered 7 months ago
by
ProductExpert12
0points
0out of 0found this answer helpful.
answer 2
yes, each side will have it's own lift.
answered 7 months ago
by
raebob
- NY
0points
0out of 0found this answer helpful.
answer 3
Yes it can. Although I would see if there is anyway you can get a weight of the individual gates so you will know if this sytem will work for you.
answered 7 months ago
by
Jonati
- Cincinnati, OH
0points
0out of 0found this answer helpful.
answer 4
yes
answered 7 months ago
by
gary333
- Galesburg, MI.
0points
0out of 0found this answer helpful.
Question
how is this mounted on a trailer that is enclosed?
asked 11 months ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
inquiring
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
This can be mounted to an enclosed trailer. It would be the same as for a utility trailer only that the lift would mount to an "L" bracket.
answered 11 months ago
by
ProductExpert12
+2points
2out of 2found this answer helpful.
answer 2
You will have to review the instructions. It comes with several brackets for mounting to the walls of enclosed trailers. I own a utility, so I have no experience with enclosed. This system should work really well on your gate(s) because they are typically much lighter than those on older utility trailers.
answered 7 months ago
by
Jonati
- Cincinnati, OH
+1point
1out of 1found this answer helpful.
Question
Does it work on a horizontal hinged gate?
i have a 14' x 6.5' trailer with a ramp gate that is hinged in the middle horizontally. when you lower the gate the hinge opens out as if your leg was folded tight to your body and hinges like your knee. Will it work on this type of gate and do you mount to the section going "up"to the hinge or the other gate section that will be farthest from the trailer when lowered?
asked 4 months, 3 weeks ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
paul3
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
It will work on hinged gates as long as it is not over 6 feet. The mounting depends on the size of the gate. It could be either place.
answered 4 months, 3 weeks ago
by
ProductExpert6
+1point
1out of 1found this answer helpful.
answer 2
I mounted mine to a four foot long gate that folded in the middle. The cable anchor bolt was located by unfolding the gate and with the gate locked upright to the trailer, finding the point on the leaf furthest from the trailer where the cable could attach without putting tension on the springs. To lower the gate I fold the leaf to the upright position before unlocking the gate and then pull the gate down in the unfolded position. To raise the gate, just pick up with one hand, close and secure the gate and then fold the rear leaf down. The cable will be slack in the folded position.
answered 1 week, 1 day ago
by
roadking52
- Cordele, GA
0points
0out of 0found this answer helpful.
Question
Will this attach to a round side rail?
asked 1 month, 1 week ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
The gorilla lift can be mounted to a round side rail, however the hardware that is included may not be long enough, and you will have to do some spot welding.
answered 1 month, 1 week ago
by
ProductExpert7
0points
0out of 0found this answer helpful.
answer 2
If you welded a piece of flatstock to the round rail first to mount the square tubes on it could work. You would have to mark your holes for the square tubing drill and tap them to attatch square tube to the flatstock I would use 1/4" flatstock and make sure they are welded on good! The other option would be to bolt all the way thru flatstock and round rail because they supply a carrige bolt that is 2"-1/2" to 3" long.
answered 1 week ago
by
dollarben
- Tulsa,Okla
0points
0out of 0found this answer helpful.
Question
Can this be used with trailer ramps?
On a 16-ft low-boy trailer, can this be used to raise and lower the ramps?
asked 1 year ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Anonymous
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Each lifting arm on this Gorilla-Lift assist is capable of lifting ramps up to 6 feet long and weighing up to 150 pounds.
answered 1 year ago
by
ProductExpert11
0points
0out of 0found this answer helpful.
Question
how do we order extra parts ?
example ,rollers that are in lift.
asked 7 months ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
pwkk
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
For parts pricing and availability, please call our Parts Department at 1-800-222-5381.
answered 6 months ago
by
ProductExpert5
0points
0out of 0found this answer helpful.
Question
can it be used on a trailer with a "beavertail"
The back of my trailer slopes slightly to allow for easy loading. will these work on this type of trailer also?
asked 5 months, 2 weeks ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
Anonymous
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The tailgate lift assist will work with a "beaver tail" gate up to 150 pound capacity.
answered 5 months, 2 weeks ago
by
ProductExpert25
0points
0out of 0found this answer helpful.
Question
can it be installed and used on a flatbed trailer with no side rails?
asked 3 months, 2 weeks ago on Gorilla-Lift 2-Sided Tailgate Lift Assist, Model# 40101042G
by
cenco
+2points
2out of 2found this question helpful.
1 answer
Answers
answer 1
Yes, this can be used with a flatbed trailer with no side rails.
answered 3 months, 1 week ago
by
ProductExpert12
+2points
2out of 2found this answer helpful.