We do not carry an adapter to reduce the bore size.
answered 4 years, 9 months ago
yes there is, all you need is a bushing that is 1/2" I.D. X 3/4" O.D. with a lenth that matches the space between the forks of the caster. any place that sells nuts & bolts should have them.
answered 3 years, 9 months ago
- Sarasota, FL
3out of 3found this answer helpful.
Go to your local hardware store and purchase a reducer adapter from 3/4" to 1/2".
answered 3 years, 5 months ago
- Weld County, CO
my bore size was 5/8, snapper 150z,, So my lawn shop gave me a sleeve that is 3/4 inch, 1/2 inch inside diameter, , then I used a 1/2 inch bolt same length, , had to drill the holes on the mower to 1/2 inch,, some may have to cut the sleeve to length, the hub is 3 inches long, this makes more sense than a reducer, grease will make it to the sleeve this way, not when you use a reducer bushing
answered 2 years, 6 months ago