The winch is equipped with keyhole slots in the base for use with quick mounting shoulder studs, if desirable. If you wish to use quick mount studs, they should be mounted securely into the winch stand. After positioning the winch on the studs, a 3/8" bolt should be placed in one of the other holes available to keep the winch securely in position.
answered 5 years, 7 months ago
2out of 2found this answer helpful.
you could drill holes through the wall, run bolts from the back side and install washers and nuts on the winch side. BUT.... you're going to need more than a 3/4" thick siding board to anchor this to. 1200 lbs of pull will rip siding right off of the framing members.
answered 3 years, 7 months ago
- Syracuse, IN.
1out of 1found this answer helpful.