5ft. x 8ft. heavy-duty trailer is an ideal transport solution and is ready for handling larger loads. Fenders prevent rocks and debris from damaging your cargo. Safety chains and lights with wiring harness connect to your vehicle to ensure trailer safety on the road, even in dark or rainy conditions. Gross Vehicle Weight Rated (lbs.): 1,980, Load Capacity (lbs.): 1,715, Deck Size L x W (ft.): 8 x 5, Wheel Size (in.): 12, Coupler Size (in.): 2, Frame Material: Steel, Brakes: No, Bed Tilt: No, Rear Gate: No, Side Rails Included: No, Lights: Yes, Fenders: Yes, Ramps Included: No, Assembly Required: Yes, Overall Dimensions L x W x H (in.): 136L x 76W Overall length is 136in. and overall width is 76in. Payload capacity 1715 lbs 1980-lb. max. GVWR Meets or exceeds all road-ready specifications Includes two 5.30-12in. tires, light kit and coupler Decking not included Assembly required

Customer Questions & Answers:

28 Questions

42 Answers

Ask a New Question

Overall Rating:

4.8

out of

Read All 32 Reviews32

Questions & Answers for FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

Question

Is this trailer strong enough to haul a 800 pound motorcycle 1000 miles?

I am looking for a trailer that I can haul a 800 motorcyle from Florida to Ohio and then back. Has anyone done this much travelling with this trailer?

asked 1 year, 2 months ago

Redbricker

- Florida

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

+1point

1out of 1found this question helpful.

3 answers

Answers

answer 1

Yes, This Northern Industrial trailer would work great for hauling your motorcycle.

answered 1 year, 2 months ago

NITExpert11

+1point

1out of 1found this answer helpful.

answer 2

Yes, properly decked this trailer would haul that with no problem.

answered 11 months ago

jms803

- Pittsburgh, PA

+1point

1out of 1found this answer helpful.

answer 3

Been Hauling my bike around for 3 years 750 Vulcan no problem could probably pu two on it.

answered 4 months, 1 week ago

Uncle

- Garden Valley Ca.

+1point

1out of 1found this answer helpful.

Question

Where can I find bolt on stake pockets that fit this trailer

Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

asked 1 year ago

blowndisk

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

+1point

1out of 1found this question helpful.

3 answers

Answers

answer 1

Northern Tool has Galvinized ones that bolt right on

answered 4 months, 1 week ago

Uncle

- Garden Valley Ca.

+1point

1out of 1found this answer helpful.

answer 2

Northern Tool does sell stake pockets and related tie-down hardware. I ordered these and they worked very well with no additional drilling required.

answered 4 months, 1 week ago

mariposa1

- Mariposa, CA

+1point

1out of 1found this answer helpful.

answer 3

Please see the link below for stake pockets.

Products from my answer

Trailer Stake Pocket - Straight, Model# 45004G

(13)

answered 4 months, 1 week ago

NITExpert

+1point

1out of 1found this answer helpful.

Question

Does this bolt together? or does it come welded?

asked 1 year, 3 months ago

Anonymous

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

3 answers

Answers

answer 1

This Northern Industrial trailer is bolted together with assembly required.

answered 1 year, 3 months ago

NITExpert11

0points

0out of 0found this answer helpful.

answer 2

Bolt together

answered 1 year, 2 months ago

camptyler

- San Diego, CA

0points

0out of 0found this answer helpful.

answer 3

You must bolt it together to assemble it. I sorted out all the nuts, bolts and washers and put them in labeled piles before I started assembly. It took half an hour or so but was well worth the time. Assembly was easy.and I am not an expert at this stuff.

answered 1 year, 2 months ago

mariposa1

- Mariposa, CA

+4points

4out of 4found this answer helpful.

Question

What is the best type/thickness of plywood to use for the deck?

asked 1 year, 2 months ago

mekim

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

A 1/2 to 3/4 inch plywood or steel mesh would work great for the decking on this Northern Industrial trailer.

answered 1 year, 2 months ago

NITExpert11

0points

0out of 0found this answer helpful.

answer 2

I used a 3/4' OSB product called "AdvanTech". I've used it for sub flooring in my houses for years. Scraps of this stuff have been left outside on my job sites for months and it still holds up. It's very rigid so you can drill it and bolt down tie rings or wheel brackets if you need them.

answered 1 year, 2 months ago

Jappo

- Welcome, NC

0points

0out of 0found this answer helpful.

Question

Are the hubs a 5 stud, 4 1/2 inch circle?

asked 1 year ago

MDCTrailer

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

+1point

1out of 1found this question helpful.

2 answers

Answers

answer 1

The hubs are a 5 bolt with a 4 1/2" bolt circle on this trailer.

answered 1 year ago

NITExpert12

+2points

2out of 2found this answer helpful.

answer 2

Yes

answered 9 months ago

ffdeng5

- Cranston, RI

+1point

1out of 1found this answer helpful.

Question

Wheel bolt patten

What is the bolt pattern on the axle, is it 5 x 5.00? I am looking to mout differnt rims on trailer.

asked 10 months ago

wpage66

- topeka KS

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

The wheel bolt hole pattern is 5 holes with a 4-1/2 inch bolt circle, on this Northern Industrial trailer.

answered 10 months ago

NITExpert5

0points

0out of 0found this answer helpful.

answer 2

5 bolts in a 4.50" on center circle.

answered 9 months ago

ffdeng5

- Cranston, RI

0points

1out of 2found this answer helpful.

Question

Do the brake lights also serve as directionals on this trailer kit?

asked 8 months ago

sdehaven4

- Blue Bell, PA

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

The trailer lights are a combination brake and turn signal light.

answered 8 months ago

NITExpert12

0points

0out of 0found this answer helpful.

answer 2

Yes, they work very well.

answered 4 months, 1 week ago

mariposa1

- Mariposa, CA

0points

0out of 0found this answer helpful.

Question

Do you sell high-speed hubs and tires that would allow using this trailer at highway speeds?

asked 7 months ago

Kenji5

- Massachusetts

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

Northern Tool does sell high speed wheels and tires, but would not be intended for use with this trailer. The axle, spindles and other components are all rated for a maximum recommended speed of 45 MPH.

answered 7 months ago

NITExpert29

+1point

1out of 1found this answer helpful.

answer 2

I use this trailer to transport an ATV and drive at highway speed with no problem. I recently repacked the wheel bearings and all looked well.

answered 4 months, 1 week ago

mariposa1

- Mariposa, CA

+2points

2out of 2found this answer helpful.

Question

does the 5x8 trailer tilt

Does the 5x8 trailer tilt or can it be made to tilt

asked 9 months ago

tom65

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

No, this Northern Industrial heavy-duty trailer is not made or intended to tilt.

answered 9 months ago

NITExpert11

+1point

1out of 1found this answer helpful.

answer 2

no it does not tilt and i do not think it can be made to tilt

answered 3 months, 2 weeks ago

rac70

- new jersey/florida

0points

0out of 0found this answer helpful.

Question

What is the country of origin ?

asked 8 months ago

Anonymous

on FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

+2points

2out of 2found this question helpful.

2 answers

Answers

answer 1

The Country of Origin of the trailer is Taiwan.

answered 8 months ago

NITExpert12

-2points

0out of 2found this answer helpful.

answer 2

Taiwan

answered 4 months, 1 week ago

mariposa1

- Mariposa, CA

0points

0out of 0found this answer helpful.

1 2 3 next>>

Looking for Answers about FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.?

Customer Questions & Answers for FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

Questions & Answers for FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.

Is this trailer strong enough to haul a 800 pound motorcycle 1000 miles?

Where can I find bolt on stake pockets that fit this trailer

Does this bolt together? or does it come welded?

What is the best type/thickness of plywood to use for the deck?

Are the hubs a 5 stud, 4 1/2 inch circle?

Wheel bolt patten

Do the brake lights also serve as directionals on this trailer kit?

Do you sell high-speed hubs and tires that would allow using this trailer at highway speeds?

does the 5x8 trailer tilt

What is the country of origin ?

Customer Questions & Answers for
FREE SHIPPING - Northern Industrial Heavy-Duty Trailer with 5.30-12in. Tires, 5ft. x 8ft.