Question
Distance from water source
The pump would need to be 100' away from water source. Water source is down a gradual 4' to 6' drop to creek. Could this pump draw the water to the pump that far away with a 3/4" garden house? If not what do you recommend? I will be watering my front and back lawn from creek water if possible.
Thanks,
Craig
asked 1 year, 11 months ago
on Wayne Stainless Steel Sprinkler Booster Pump - 720 GPH, 1 HP, 1in., Model# PLS100
0points
0out of 0found this question helpful.
answer 1
This pump will not work for your application because it will only suck water from 20 feet away.
At this time we do not offer a pump that can draw water from 100 feet away.
answered 1 year, 11 months ago
0points
0out of 0found this answer helpful.
answer 2
I would recommend locating the pump closer to the water source using an extension cord and a resinforced intake hose to prevent collapsing under suction. A foot valve with check valve is also handy to filter larger particles and avoiding the need to prime again between each use.
answered 1 year, 8 months ago
+1point
1out of 1found this answer helpful.
answer 3
I am pumping water from a lake to the front of my lake house . The lift from the lake to the front of the house is approx. 30 feet, distance is approx. 80' and I have plenty of pressure. Holds prime unless it sets for a week or so, but it is very fast to prime with 2 cups of water from the lake. Hope this helps you.
Jim D.
answered 1 year, 8 months ago
by
Lakeboy
- St. Louis, MO
+2points
2out of 2found this answer helpful.
answer 4
I don't think you could use a garden hose as an inlet hose. It is too soft and the suction of the pump would collapse it. I think it could draw water that far, but placing the pump so far from the creek could make initially priming it tricky and you would need a good foot valve. I would recommend placing the pump closer to the creek and using a longer outlet hose if possible. I have mine set up to lift water about 15', using about 30' of 1" rigid black plastic line and a brass foot valve. I have used up to 150' of hose on the outlet side.
answered 1 year, 8 months ago
by
Gandydancer
- West Virginia
+1point
1out of 1found this answer helpful.
answer 5
The manufacturer recommends no more than 20 foot of suction pipe. The pump would work much better if you moved it to the creek to shorten the suction and lengthen the discharge. Consider a long extension cord before trying the long suction line. Additionally you should only use a 1" suction line...3/4" will compromise this efficiency of the pump. The elevation of the pump above the creek is not an issue compared to the length of the suction.
answered 1 year, 8 months ago
0points
0out of 0found this answer helpful.