"Gear-type, heavy-duty hydraulic pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. Shaft Diameter in. 1 3/8, Shaft Type Spline 6-tooth, GPM 11.4, Weight lbs. 36, Rotations Per Minute 540, Material Aluminum, cast iron, Max. PSI 2,000. GPM 11.4 RPM 540 Diameter/Spline 1 3/8in. / 6-Spline"
Customer Questions & Answers: